Posts by secure_admin

How to Maintain Granite Countertops

»Posted by on Aug 8, 2018 in countertops | 0 comments

Granite kitchen countertops are usually the greatest upgrade you can do to your home. And when you take care of your granite kitchen countertops, they can probably stay for decades and still appear just as beautiful and polished as the day they’re installed. Granite countertops come in different patterns and colors to blend with the personal tastes of any homeowners. The granite found in the countertops may be the most durable and the oldest substance in your home however, special precautions should still be observed in order to protect it from damaging and the same rule also applies in quartz countertops in Overland Park. 

To protect your granite countertops from damage or stains, the following methods need to be followed: 

  1. Basically, your granite countertops can be cleaned with a soap and water.
  2. Seal your granite countertops with a high-quality granite sealer. This must be applied when the granite is already totally dry. Sealer gives additional protection from stains, as well as it enhances the shine and look of the granite.
  3. Do not place meat directly on your granite countertops.
  4. If a spill should happen, clean it up before the stain penetrates the surface. Granite is semi-absorbent and may absorb stains if water or any spills are left in a long period of time.
  5. Do not put sprinkling oil on your counters.
  6. Do not use acids or acidic products to prepare your food on granite countertops. Just avoid any acid materials be placed on your granite countertops.
  7. Using ordinary cleaning agents on your granite countertops will strip or fade seal, thus, leave the granite pores exposed.
  8. When preparing your food, use a cutting or chopping board. Cutting directly on your countertops will just damage both the granite and your knives. In addition to that, bacteria from vegetables, meat and other ingredients may penetrate into the porous surface of the granite. On the other hand, acidic ingredients or oils can cause stains.
  9. Remove your jewelries most especially diamond rings before cooking. Even though granite materials are very durable and incredibly hard, diamonds are even more so. Your ring can leave a chip in the countertop when it is accidentally slipped.
  10. Put trivets under any hot pans or pots. One of the advantages of granite kitchen countertops is that you may place hot pots directly on the surface without causing thermal shock or burn mark. Nevertheless, the use of a trivet is a wise idea, as loose particles between the countertops and the pan can cause pitting and scratches.
  11. Never leave wet containers directly on your granite kitchen countertops. Spills aren’t the only way fluids can penetrate into the porous surface of granite. Containers like olive oil or any cooking oil bottles are usually very difficult to keep totally dry and layers of oils beneath the bottle will discolor the countertop. And a prolonged contact of these oils to the granite will cause stains and ruin the elegant look of your granite countertops. Better place these types of bottles in a cabinet or on a shelf.
read more

Myths, Facts and Outright Lies in Floor Sanding

»Posted by on Jul 23, 2018 in Floor Sanding | 0 comments

The quantity of floor sanding literature available these days is vast that if you will ask three different contractors regarding this subject; you will be hearing at least two unlike opinions on certain topics. Though, if you have concerns regarding your floor finishing that need to be addressed right away you can visit bestfloorsandingmelbourne.com.au/. 

You must determine what is true and what is not, but how can you know if it a fact or a myth or lies? Here are some of the common floor sanding myths, facts and lies.  

Myth #1: Dustless Flooring is also Dust FREE. 

With the technology advances in floor sanding area, it is made possible to drastically reduce the quantity of the dust left behind. Always expect to see a little dust after finishing your project.  DUSTLESS flooring is named that way for a reason, If it is virtually no dust, those in marketing will take this as an advantage and call it DUST FREE. 

Myth #2: To keep your floor in best shape, recoat every 2-3 years 

If you are being offered all kinds of finish maintenance plans, do not fall for their stories for they are nothing but are only attempting to get your money. 

Nowadays, floor finishes are long lasting and strong. There is no need for any type of maintenance to keep your floor in great shape. 

  

Fact #1: The Type of Finish Will Determine its Length 

This is somewhat true that some finishes are durable than the other and they will last long if they are properly used. 

Make sure your service provider applies the right number of coats and allows sufficient drying time in between coats and won’t combine incompatible finishes and stains, always buffs between coats so that your floor will not need refinishing for as long as you will stay in the house. 

Fact #2: The compatibility of finishes and stains is essential for a lengthy finish. 

Yes, many contractors still fail to learn this. The use of water-based finishes in oil-based stains on the same day, which is one of the most regular mistakes made by flooring contractors. 

If you decide to stain your floor, make sure your contractor uses compatible stains and finishes, or it takes the necessary steps to ensure proper bonding between the two. 

Fact #3: Sanding a Hardwood Floor Can be Dangerous 

Yes, if improperly executed, it can put your house in danger. To be more exact is the danger of fire. 

  

Lie #1: Floor sanding is just sanding. 

Floor sanding is not just sanding. Many contractors bid based on the assumption of just sand the floor quickly and applying two coats of finish then collect your money and leave. But if you will invest large amount of money. Make sure that your floor will look beautiful in the end.  

Project preparation, filling up holes and dents, nail setting, replacements of broken boards are all steps in sanding process. 

Lie #2: there are nails, you can’t sand the floor. 

Seeing nails does not always mean that there is no more floor sanding left on your floor. Some contractors will attempt to make you replace the old floor therefore it will increase your bill. Do not be fooled, always ask for proof before accepting to remove a floor. 

Lie #3: We will be going to Sand Your Floor and we will charge you half the price of other contractor.  

Many people still fall for this and end up paying more when the project is complete. 

read more

How to Identify a Professional Electrician 

»Posted by on Jul 21, 2018 in Professional Electrician | 0 comments

You want to make sure that the individual you hire is insured, certified, and qualified, whenever you request the services of a professional electrician to conduct electrical services in your office or house. However, it is also important that the person is highly experienced and skilled in carrying out electrical repairs and electrical services. But, it is hard to know whether this could be the condition simply by speaking to that person on the phone. 

Professional Electrician 

Luckily, it is possible to be tactical in the approach that you pick the ideal electrical firm for your necessities.  

Insurance and License 

It is definitely important that you make sure that the electricians working in your office or house are appropriately insured and licensed and that they are willing to offer you with details of those. It might be possible to look for these details through the company if the electrician works for an electrical firm. However, these checks still are really significant for electrical contractors that are independent.  

Do not ever try to hire a “skilled” family member or friend to do the job in your house. The legal, financial, and emotional implications are probably to be huge if anything happens to you, your property, or them.  

References 

Obtaining references from others is one of the greatest methods to know if an electrician is a professional one. How will you know if others have been impressed and satisfied with their job without such warnings or suggestions?  

Ask for an Initial Estimate 

Without getting an estimate and agreeing to a quote, do not let the electrician start his work in your house. The truth is that you could get estimates from few electricians even before you choose the one who would to the job for you.  

Remember that several firms provide discounts to new clients and might provide great value to loyal clients.  

Permissions and Permits 

Most electrical work would require certain permits and/or permissions before it could be started. A good electrician would not try to cut corners by doing the job without the required permits. A professional electrician would always ask for the approval.  

Though the process of getting such permissions might often delay job from continuing or even starting, doing the job without the required permissions places you at untold danger and your insurance might be considered invalid.  

Timeline 

An effective and high quality electrician would offer you a proposed timeframe for completion and milestones of the job, aside from offering you with a quote of the overall expenses of the job. Though several adjustments to the projected timeframe might well be required as job is being completed, it’s very handy to have a sign of how long the job is going to be. 

Recommending and Listening 

The greatest electricians would listen always to your expectations and needs and would offer details and information in relation to the job. A professional Redlands Electrician would try to explain the task using terms and language that you could comprehend.  

read more